Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Why not support multiple workstations to connect simultaneously?

The problem's topology is :

http://best.godcn.com/geniusccie/other/topology.gif

Problem:

Only one workstation can access US side 192.168.10.29 through a VPN

tunnel, not support multiple workstations to connect to 192.168.10.29

simultaneously.

1.Firewall linux RadHat7.2

File:/etc/rc.local

#!/bin/sh

#

# This script will be executed *after* all the other init scripts.

# You can put your own initialization stuff in here if you don't

# want to do the full Sys V style init stuff.

touch /var/lock/subsys/local

echo 1 >/proc/sys/net/ipv4/ip_forward

modprobe ip_tables

modprobe iptable_nat

modprobe ip_nat_ftp

modprobe ip_nat_irc

¡¡

iptables -A FORWARD -s 192.168.0.0/24 -j ACCEPT

iptables -A FORWARD -i eth0 -m state --state ESTABLISHED,RELATED -j

ACCEPT

iptables -t nat -A POSTROUTING -o eth0 -s 192.168.0.0/24 -j SNAT --to

210.83.2.199

2. WorkStation's software

Cisco VPN service

Cisco VPN client

3. Requirement:

from 192.168.0.150 to 192.168.0.170 can access US side 192.168.10.29

through a VPN tunnel.

Thanks.

1 REPLY

Re: Why not support multiple workstations to connect simultaneou

Often times complex troubleshooting issues are best addressed in an interactive session with one of our trained technical assistance engineers. While other forum users may be able to help, it’s often difficult to do so for this type of issue.

To utilize the resources at our Technical Assistance Center, please visit http://www.cisco.com/tac and to open a case with one of our TAC engineers, visit http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

94
Views
0
Helpful
1
Replies
CreatePlease to create content