Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Windows 2003 cannot access remote network using Cisco VPN

I have two computers at home, one is XP Pro SP2 and another is Windows 2003 server SP1. If I establish Cisco VPN (version 4.6) from XP to the office (ASA 5510), I can access the office network resources. However, if I establish the Cisco VPN on 2003, I can?t do the same. After study both routing tables, I find XP has this route: 192.168.0.0 255.255.0.0 192.168.101.5 192.168.101.5 1 but the 2003 doesn?t. If I add this route manually (rou? add 192.168.0.0 mask 255.255.255.0 192.168.101.3) on 2003, then I can access the resources. Why?

2003 routing tale.

Active Routes:

Network Destination Netmask Gateway Interface Metric

0.0.0.0 0.0.0.0 192.168.10.1 192.168.10.3 40

x.x.x.37 255.255.255.255 192.168.10.1 192.168.10.3 1

127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1

192.168.10.0 255.255.255.0 192.168.10.3 192.168.10.3 40

192.168.10.3 255.255.255.255 127.0.0.1 127.0.0.1 40

192.168.10.255 255.255.255.255 192.168.10.3 192.168.10.3 40

192.168.101.0 255.255.255.0 192.168.101.3 192.168.101.3 10

192.168.101.3 255.255.255.255 127.0.0.1 127.0.0.1 10

192.168.101.255 255.255.255.255 192.168.101.3 192.168.101.3 10

224.0.0.0 240.0.0.0 192.168.10.3 192.168.10.3 40

224.0.0.0 240.0.0.0 192.168.101.3 192.168.101.3 10

255.255.255.255 255.255.255.255 192.168.10.3 192.168.10.3 1

255.255.255.255 255.255.255.255 192.168.101.3 192.168.101.3 1

Default Gateway: 192.168.10.1

===========================================================================

Persistent Routes:

None

  • Other Security Subjects
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Windows 2003 cannot access remote network using Cisco VPN

The VPN client has not been tested on Win2003. The client requirements are detailed here:

http://www.cisco.com/univercd/cc/td/doc/product/vpn/client/4_6/relnt/4604cln.htm#wp1024664

and show only up to WinXP is supported.

2 REPLIES
Cisco Employee

Re: Windows 2003 cannot access remote network using Cisco VPN

The VPN client has not been tested on Win2003. The client requirements are detailed here:

http://www.cisco.com/univercd/cc/td/doc/product/vpn/client/4_6/relnt/4604cln.htm#wp1024664

and show only up to WinXP is supported.

New Member

Re: Windows 2003 cannot access remote network using Cisco VPN

Thank you for the link. I fixed it by upgrading a new version. The case study can be found at http://www.chicagotech.net/cisco/w2003&ciscovpn.htm

111
Views
0
Helpful
2
Replies