I know you can have VPN Dailer clients receive a DHCP address from an internal server when establishing a VPN to a 3005 Concentrator. I'm wondering if you can set a Pix 501 to do the same. Is it possible to have the connecting VPN client receive an internal DHCP address from an internal server instead of configuring the client to use an IP pool?
I have used PIX 6.3 extensively and do not see an option in it to have IP addresses assigned to VPN clients from a DHCP server. May be you can check it out on the latest PIX 7.x versions for this feature.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...