Here are the lines of my config concerned with my question
ip address inside 192.168.202.129 255.255.255.0
logging trap warnings
And here is a sample of what my syslog server gets A syslog message has been received from host XYQCNOCFW001 (192.168.202.129
As you can see the hostname does not correspond . And the hostname in the syslog message is the previous hostname of this firewall.It has been changed and a wr ter have been applied. But it remains somewhere in the config and the trap sender
is using this old value. Any idea on how to change this.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...