Hi, We´ve been using XRd as a way to do integration testing with our autoprovisioning platform using gnmi.This works great.However I'm currently trying to do end to end testing of the whole solution with actual traffic forwarding across the finished ...
Hi Community!I've some problems with one ASR1002HXI have several deployments in different cities, but with only one, the sessions in some home banking get closed after some minutes. It's not exact, sometimes after 1 minute, other after 4 minutes (alw...
I have two routers with dual links between them with some layer 2 technologies in between, i am using IBGP ECMP to load-balance traffic between them, and I have ISIS as an underlying IGP for internal reachability. I would like to enable the BFD to de...
Hihere is the scenario.We are giving 3Gbps internet service to a user through 2 connection.there are 2 different vlan ids and 2 bgp peers with the user.we the serving the service on an ASR1002-HX and the vlans are coming through a port-channel with 2...
We have a requirement to have a virtual router in a Colocation Data Center in Europe. The model we were given by the provider is Catalyst 8000v Autonomous Mode.We need to connect an IPT to it and receive multiple full BGP table instances (multipath) ...
Hi all,I've been tasked with setting up a Lawful Interception solution for our company. I have read quite a few documents and googled the crap out of this but for the life of me, I can't get the basics working.My intention at this early stage is to ...
We have several Remote Phy shelves deployed (RPD shelves) in our CO's feeding our nodes running DOCSIS 3.0 and OFDM. Customers with 3.0 modems obvisouly link up with the traditional DS channels. Our 3.1 modems lock on to the OFDM band as well. Random...
Good afternoon I am trying to upgrade the collector from version 2.10.0.1 to version 2.10.0.7, according to the cisco manual I have to download the file and place it in the /opt directory of the collector, once I try to unzip it and throw the followi...
Hello,we got a new cisco ASR 1002 ,does it require a license to work as BRAS?? Thnx
hello everyone,I have a problem like thisWe will move from mikrotik to cisco asr9k bng,I made all the configs to run it as pppoe bras on the bng side, butNo PADI, etc. in debug aaa, radius, ppp, pppoe logs. information is not comingI connected the mo...
I have a unique scenario where I need to redirect certain traffic for Service App interface inward to another route/hop apart from default route.Sample config:interface ServiceApp2ipv4 access-group wireEngine-LAN ingress ASR9910 with VSM-500Appreciat...
Hi,I'm a network engineer whom although works for an ISP has no experience with QoS.There is an end user, "behind" a partner ISP, with a couple hundreds sites, that are querying (inbound: end user => partner ISP => us/me => Internet) and fetching (ou...
Hi all,I am trying to get the BNG node ( ASR 9902 XR 7.9.21) to populate the subscriber info when the http is being redirected to a Web portal.The http redirect works fine but the BNG node does not appent the actual subscriber info ( IP-Address, User...
The device, connected to the antenna through a GNSS port and configured as a Grandmaster (GM) for Precision Time Protocol (PTP) with Time of Day (TOD) provisioning to a slave, has successfully discovered and locked onto the satellites. Unfortunately,...
Hi, Can anyone introduce me to a Cisco book about Q-in-Q? Actually, I understand Q-in-Q, but I am a little confused using the 'second-dot1q' command. For example, what is the difference between the 'encapsulation dot1q 100' command and the 'encapsula...
