Hi All,
I am trying to do PPPoE on a range of C-Tag (QinQ inner vlans) on 7606 with ES+ card. This is quite easy on the 7200/7300 series routers, as such:
interface GigabitEthernet0/3.2528
encapsulation dot1Q 2528 second-dot1q 100-200
pppoe enable group TEST
This seems to be impossible on the 7600. It doesn't take vlan range on the second-dot1q.
TEST-7606(config)#int GigabitEthernet3/1.10
TEST-7606(config-subif)#encapsulation dot1Q 10 second-dot1q ?
<1-4095> Second (inner) 802.1Q VLAN ID
I also tried by using the EVC, PPPoE is not available under the EVC configuration mode.
TEST-7606(config-if)#service instance 10 ethernet
TEST-7606(config-if-srv)#ppp?
% Unrecognized command
TEST-7606(config-if-srv)#ppp
I am running 122-33.SRE6 advanced IP IOS.
Can anyone please give some advices?
Any help would be appreciated
Regards,
Jing