As I understood, ASR 9001 has integrated 4 onboard 10 GB interfaces and two Line Card slots. It has MOD 80 architecture.
Onboard 10 Gb interfaces has same QoS capabilities as MOD TR modular line cards. ( 8 queues per port and etc)
What about the two Line Card Slots? If I use A9K-MPA-20x1GE, A9K-MPA-2x10GE or A9K-MPA-4x10GE line card , which QoS specifications I will have? Like MOD SE or MOD TR? As I know, these line cards has SE functions on the ASR 9001/9001S. Does it mean more than 8 queues per port? Can I terminate Pseudowire Headend on these interfaces and use QoS on them?
IntroductionPre-requisite: Caveat :When IPXE Boot could be done : IPXE Boot :Ipxe boot using DHCP Server :
iPXE boot in ASR9K
Migration recommendation document for Cxr to Exr.
This document applies to NCS5500 and ASR9000 routers and has been verified as such.
traditional ECMP or equal cost multipath loadbalances traffic over a number of available paths towards a destination. When one path fails, the traffic gets r...
Hi community,I just wanted to share my findings about accesing to ACL counters by SNMP on ASR9000/XR.
Searching on Internet I found the section ACL Counters Using SNMP in the IP Addresses and Services Configuration Guide but I didn't found any inf...