I had strange I/O memory issue i wanted to discuss with you guys.
Basically I have two C2821 all same hardware, configuration and IOS except one is with 256MB DRAM, and other one is with 1GB DRAM. Memory stats are attached.
I have no clue about:
- why free i/o memory is so low onto C2821 with 1GB DRAM?
- total i/o memory is the same on both routers; shouldn't it be a percentage of the total DRAM memory?
Actually there was problem with generating accounting RADIUS requests/none were coming out from the one with 1GB DRAM/ and after increasing i/o memory i.e. "memory-size iomem 5" messages started to come out.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...