Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

%C6K_PLATFORM-1-DISABLE_NON_C7600_CHASSIS

Dear Sir,

chassis is OSR-7609 with sup720, OSM-2+4GE-WAN+ and WS-X6548-RJ-45, we will add on SIP-400 with SPA-5X1GE-V2 into slot.

in order to support new hardware.

we try to upgrade from version s72033-advipservicesk9_wan-mz.122-18.SXF13.bin to c7600s72033-advipservicesk9-mz.122-33.SRB4.bin.

when reload new version, message as belows appear. system could not boot.

------------------------------------------------

*Nov 17 18:12:14.355: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

*Nov 17 18:12:14.279: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor

*Nov 17 18:12:14.319: %C6K_PLATFORM-1-DISABLE_NON_C7600_CHASSIS: Software has detected an attempt to run a c7600 image on an incompatible chassis OSR-7609 (36867). This image will not boot.

*Nov 17 18:12:14.739: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

*Nov 17 18:12:14.739: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.

*Nov 17 18:12:14.739: %PFREDUN-4-SUP_FORCE_TO_ROMMON: Supervisor forced to rommon with reason: Cannot continue... disabling autoboot and resetting

System Bo otstrap, Version 8.1(3)

Copyright (c) 19 94-20 04 by cisco Systems, Inc.

Cat6k-Sup720/SP processor with 1048576 Kbytes of main memory

rommon 1 >

-----------------------------------------------

due to the new version will check chassis type.

the original type is OSR-7609, please advise how to fix this issue in order to support SIP400 with SPA-5X1GE-V2 on OSR-7609.

looking forward to hearing from you soon.

thank you very much.

best regards,

Jason Lin

2 REPLIES
Cisco Employee
Cisco Employee

Re: %C6K_PLATFORM-1-DISABLE_NON_C7600_CHASSIS

You "might" want to do some research on the 12.2(33)SX* release and see if that works for you.

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/release/notes/ol_14271.html

Please read the documentation carefully (especially unsupported hardware section) to figure out your compatibility.

1246
Views
0
Helpful
2
Replies
CreatePlease to create content