Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
New Member

c7201 error SFP is missing [0]

I tried to install 12.4(X)T on this chassis to support PA-MC-2T3-EC. "Show fac status" gives me the following:

Router#sh facility-alarm sta

System Totals Critical: 1 Major: 0 Minor: 0

Source Severity Description [Index]

------ -------- -------------------

SFP Slot 0/3 CRITICAL SFP is missing [0]

Cisco version SFP is in and interface is UP and UP.

Router#sh int g0/3

GigabitEthernet0/3 is up, line protocol is up

Hardware is i82546, address is 0024.97a6.ee17 (bia 0024.97a6.ee17)

Internet address is

MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation ARPA, loopback not set

Keepalive set (10 sec)

Full-duplex, 1000Mb/s, link type is autonegotiation, media type is LX

output flow-control is XON, input flow-control is XON

Research on bug didn't find any. There is one reported as chipset i82546 on g0/3 was missing many IOS command to retrieve information CSCsq58662. The other ports are regular NPE-G2 chipset.

Any one come about this problem and what was the resolution from Cisco.


CreatePlease to create content