Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Cisco 12008/GRP with 3GE-GBIC-SC does not export netflow data

Does anyone encountered problem in 12008/GRP with 3GE-GBIC-SC line cards that is not sending netflow data to the netflow collector? We have also a 1 Port Packet Over SONET OC-12c/STM-4c Single Mode that is also configured with netflow that is working.

IOS Version 12.0(24)S1

1 Port Packet Over SONET OC-12c/STM-4c Single Mode - LC-1OC12/POS-SM

3 Port Gigabit Ethernet - 3GE-GBIC-SC

Config:

interface POS2/0

description ::LINK TO UUNET STM4

bandwidth 622000

ip address x.x.x.x 255.255.255.252

no ip directed-broadcast

no ip proxy-arp

encapsulation ppp

ip route-cache flow sampled

crc 32

pos scramble-atm

no cdp enable

!!!! This interface sends netflow data

interface GigabitEthernet6/2

description ::TO COGENT COMMUNICATIONS (CKT ID: 1-A0CP1)

bandwidth 1000000

ip address x.x.x.x 255.255.255.252

no ip directed-broadcast

no ip proxy-arp

ip route-cache flow sampled

no negotiation auto

no cdp enable

!!!!This interface does not send netflow data

ip flow-export source Loopback0

ip flow-export version 5

ip flow-export destination x.x.x.x 9996

ip flow-sampling-mode packet-interval 1000

We have atleast 5 GSR that only the POS interface that is working in netflow but not the Gigabitethernet interface. Cisco documentation support the line cards and same with the IOS since the POS interface works well except for the Gigabitethernet interface.

Thanks in advance,

Robert

312
Views
0
Helpful
0
Replies
CreatePlease to create content