Does anyone encountered problem in 12008/GRP with 3GE-GBIC-SC line cards that is not sending netflow data to the netflow collector? We have also a 1 Port Packet Over SONET OC-12c/STM-4c Single Mode that is also configured with netflow that is working.
IOS Version 12.0(24)S1
1 Port Packet Over SONET OC-12c/STM-4c Single Mode - LC-1OC12/POS-SM
3 Port Gigabit Ethernet - 3GE-GBIC-SC
Config:
interface POS2/0
description ::LINK TO UUNET STM4
bandwidth 622000
ip address x.x.x.x 255.255.255.252
no ip directed-broadcast
no ip proxy-arp
encapsulation ppp
ip route-cache flow sampled
crc 32
pos scramble-atm
no cdp enable
!!!! This interface sends netflow data
interface GigabitEthernet6/2
description ::TO COGENT COMMUNICATIONS (CKT ID: 1-A0CP1)
bandwidth 1000000
ip address x.x.x.x 255.255.255.252
no ip directed-broadcast
no ip proxy-arp
ip route-cache flow sampled
no negotiation auto
no cdp enable
!!!!This interface does not send netflow data
ip flow-export source Loopback0
ip flow-export version 5
ip flow-export destination x.x.x.x 9996
ip flow-sampling-mode packet-interval 1000
We have atleast 5 GSR that only the POS interface that is working in netflow but not the Gigabitethernet interface. Cisco documentation support the line cards and same with the IOS since the POS interface works well except for the Gigabitethernet interface.
Thanks in advance,
Robert
