Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cisco 3845 didn't detect HWIC-1FE and SFP GLC-LHSM

Cisco 3845 not detect HWIC-1FE and

SFP GLC-LHSM.

What is latest IOS which will detect WIC HWIC-1FE , SFP GLC-LH-SM.

2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Re: Cisco 3845 didn't detect HWIC-1FE and SFP GLC-LHSM

Hi,

You need a minimum of 12.4(15)T for HWIC-1FE Support on 3845 routers.

Please refer the below URL for details:

http://www.cisco.com/en/US/prod/collateral/routers/ps5854/product_data_sheet0900aecd80581fe6_ps5853_Products_Data_Sheet.html

For the HWIC-1FE and HWIC-2FE the minimum level is Cisco IOS 12.4(15)T.

Regards,

Arul

*Pls rate if it helps*

Cisco Employee

Re: Cisco 3845 didn't detect HWIC-1FE and SFP GLC-LHSM

Hi,

Yes, the above version should support GLC-LH-SM Module.

Regards,

Arul

*Pls rate if it helps*

4 REPLIES
Cisco Employee

Re: Cisco 3845 didn't detect HWIC-1FE and SFP GLC-LHSM

Hi,

You need a minimum of 12.4(15)T for HWIC-1FE Support on 3845 routers.

Please refer the below URL for details:

http://www.cisco.com/en/US/prod/collateral/routers/ps5854/product_data_sheet0900aecd80581fe6_ps5853_Products_Data_Sheet.html

For the HWIC-1FE and HWIC-2FE the minimum level is Cisco IOS 12.4(15)T.

Regards,

Arul

*Pls rate if it helps*

New Member

Re: Cisco 3845 didn't detect HWIC-1FE and SFP GLC-LHSM

Dear ,

Thanks for your e-mail, I just want to know weather the IOS you mentioned will also support "SFP GLC-LHSM" or not?Kindly reply me.

Cisco Employee

Re: Cisco 3845 didn't detect HWIC-1FE and SFP GLC-LHSM

Hi,

Yes, the above version should support GLC-LH-SM Module.

Regards,

Arul

*Pls rate if it helps*

New Member

Re: Cisco 3845 didn't detect HWIC-1FE and SFP GLC-LHSM

Dear ,

Thanks a lot for your reply, actually the Gig0/0 interface is SFP and I change the Medi-Type to SFP.

954
Views
0
Helpful
4
Replies