I am researching Cisco MWAM with Cisco 7600 for LNS deployment and have few questions in mind, Hope some one had already worked on it or may be someone from Cisco can tell me about it, as there are less resources available for MWAM on Cisco website as well as Internet.
What we are trying to achieve here is traditional wholesale DSL where L2TP tunnels are handed over to us and we provide them the PPP connections over VPDN as well as some MLPPP stuff whenever required. I know that MWAM are end of sale and are replaced by SAMI but still i believe they may fit our requirement till Dec 2014 when the support for MWAM ends and later we can move to some other Cisco Kit.
Here is the list of the features or services that we currently use on Cisco 7206 VXR acting as a LNS.
VRF over DSL using Cisco Vendor Specific Attribute
AAA accounting periodic update
PE-CE dynamic routing over PPPoVPDN or just per vrf OSPF
Some basic subinterfaces for VLAN tagging to transit VRF's through the core.
DHCP Proxy client
Are the above requirement can be accommodated with 7600 with MWAN. I would appreciate if someone can shed some light on this and share their experience as well as thoughts on this.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...