I have configured a secondary scope to handle our increased growth. I'm utilizing CNR ver7.0 and since I have created this secondary scope the dhcp server hands out the routers option from the primary scope. For example:
Primary scope 192.168.1.0/24
Secondary Scope: 192.168.2.0/24
When a customer obtains an IP from secondary scope (192.168.2.2 for example) their GW address is 192.168.1.1.
On the CNR server I have the secondary scope configured to use the Attribute "Primary Subnet" of the primary scope (ex: 192.168.1.0/24). Any suggestions?
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...