Hi ,
Could anyone tell my why this happened ?
During upgrade to SCG6 happened this , PRE4 A crashed all time , PRE4 B didnt switchover to become as active.
crash log :
Feb 18 00:18:07: %C10KEVENTMGR-1-MAJOR_FAULT: PXF DMA Toaster Fault
, Restarting PXF
Feb 18 00:18:07: %IPCOIR-3-TIMEOUT: Timeout waiting for a response from slot 1/1.
Feb 18 00:18:07: %IPCOIR-2-CARD_UP_DOWN: Card in slot 1/1 is down. Notifying 2cable-dtcc driver.
Feb 18 00:18:07: %IPCOIR-3-TIMEOUT: Timeout waiting for a response from slot 2/1.
Feb 18 00:18:07: %IPCOIR-2-CARD_UP_DOWN: Card in slot 2/1 is down. Notifying 2cable-dtcc driver.
SLOT 5/0: Feb 18 00:17:52: %UBR10000-4-REGISTRATION_BEFORE_TFTP: Registration request unexpected: Cable Modem did not attempt TFTP. Registration Rejected. CM Mac Addr <e448.c7b6.e856>
SLOT 5/0: Feb 18 00:17:55: %UBR10000-4-REGISTRATION_BEFORE_TFTP: Registration request unexpected: Cable Modem did not attempt TFTP. Registration Rejected. CM Mac Addr <c8fb.26ec.33b0>
SLOT 5/0: Feb 18 00:17:56: %UBR10000-4-REGISTRATION_BEFORE_TFTP: Registration request unexpected: Cable Modem did not attempt TFTP. Registration Rejected. CM Mac Addr <c8fb.26dc.c2ee>
SLOT 6/0: Feb 18 00:17:54: %UBR10000-4-REGISTRATION_BEFORE_TFTP: Registration request unexpected: Cable Modem did not attempt TFTP. Registration Rejected. CM Mac Addr <c8fb.26fa.f0d8>
SLOT 6/0: Feb 18 00:17:57: %CR10K_CLNT-3-IPCTXERR: IPC send failure: client=5 entity=0 ses=6/0 msg=6 err=timeout
SLOT 6/0: Feb 18 00:17:57: %REQGRP-3-RPCREQ: RPC blocked message for client 5 entity 0 (slot6/0): RPC blocked message timeout waiting for ACK/RPC Reply.
SLOT 6/0: Feb 18 00:18:05: %CR10K_CLNT-3-IPCTXERR: IPC send failure: client=5 entity=0 ses=6/0 msg=6 err=timeout
SLOT 6/0: Feb 18 00:18:05: %REQGRP-3-RPCREQ: RPC blocked message for client 5 entity 0 (slot6/0): RPC blocked message timeout waiting for ACK/RPC Reply.
SLOT 5/1: Feb 18 00:17:57: %CR10K_CLNT-3-IPCTXERR: IPC send failure: client=5 entity=0 ses=5/1 msg=6 err=timeout
SLOT 5/1: Feb 18 00:18:07: %INTR_MGR-3-INTR: Slot 5/1 Waxbill (Datapath Switch): SPI4_PORT0_INTR_RXCH0_MTU_SIZE_ERROR
SLOT 5/1: Feb 18 00:18:07: %INTR_MGR-3-INTR: Slot 5/1 Waxbill (Datapath Switch): SPI4_PORT0_INTR_RXCH0_EOP_ABORT
SLOT 6/1: Feb 18 00:17:58: %CR10K_CLNT-3-IPCTXERR: IPC send failure: client=5 entity=0 ses=6/1 msg=6 err=timeout
SLOT 6/1: Feb 18 00:17:58: %REQGRP-3-RPCREQ: RPC blocked message for client 5 entity 0 (slot6/1): RPC blocked message timeout waiting for ACK/RPC Reply.
Feb 18 00:18:08: Complex restart, reason is PXF DMA Event
Feb 18 00:18:09: %C10K_TOASTER-6-STARTLOAD: Downloading Microcode: file=system:pxf/c10k-cr4-ucode.101.0.0.0, version=101.0.0.0, description=Experimental Software created Thu 25-Jul-13 00:39 by rjiao in view rjiao-scg_CSCtz84970_ucode
Feb 18 00:18:10: %LINK-3-UPDOWN: Interface HTDP0/0/1, changed state to down
SLOT 5/0: Feb 18 00:17:57: %CR10K_CLNT-3-IPCTXERR: IPC send failure: client=5 entity=0 ses=5/0 msg=6 err=timeout
SLOT 5/0: Feb 18 00:17:57: %REQGRP-3-RPCREQ: RPC blocked message for client 5 entity 0 (slot5/0): RPC blocked message timeout waiting for ACK/RPC Reply.
Feb 18 00:18:10: %IPCOIR-5-CARD_DETECTED: Card type 2cable-dtcc (0x5B0) in slot 2/1
Feb 18 00:18:10: %IPCOIR-5-CARD_DETECTED: Card type 2cable-dtcc (0x5B0) in slot 1/1
SLOT 5/0: Feb 18 00:18:01: %UBR10000-5-USMODCHANGE: Interface Cable5/0/4 U3, dynamic modulation changed to 64-QAM
Feb 18 00:18:10: %UBR10KTCC-6-CHG_CLK_REF: Clock reference source set to Internal for DTCC card 1/1 by process Plugin Start
Feb 18 00:18:10: %UBR10KTCC-6-CHG_CLK_REF: Clock reference source set to Internal for DTCC card 2/1 by process Plugin Start
Feb 18 00:18:11: %LINEPROTO-5-UPDOWN: Line protocol on Interface HTDP0/0/1, changed state to down
Feb 18 00:18:11: %UBR10KTCC-5-DTISLOT: DTCC slot 1/1: card role changed to Standby
Feb 18 00:18:11: %UBR10KTCC-5-DTISLOT: DTCC slot 2/1: card role changed to Standby
SLOT 5/0: Feb 18 00:18:05: %CR10K_CLNT-3-IPCTXERR: IPC send failure: client=5 entity=0 ses=5/0 msg=6 err=timeout
SLOT 5/0: Feb 18 00:18:05: %REQGRP-3-RPCREQ: RPC blocked message for client 5 entity 0 (slot5/0): RPC blocked message timeout waiting for ACK/RPC Reply.
SLOT 6/1: Feb 18 00:18:06: %CR10K_CLNT-3-IPCTXERR: IPC send failure: client=5 entity=0 ses=6/1 msg=6 err=timeout
SLOT 6/1: Feb 18 00:18:06: %REQGRP-3-RPCREQ: RPC blocked message for client 5 entity 0 (slot6/1): RPC blocked message timeout waiting for ACK/RPC Reply.
SLOT 6/1: Feb 18 00:18:08: %INTR_MGR-3-INTR: Slot 6/1 Waxbill (Datapath Switch): SPI4_PORT0_INTR_RXCH0_MTU_SIZE_ERROR
SLOT 6/1: Feb 18 00:18:08: %INTR_MGR-3-INTR: Slot 6/1 Waxbill (Datapath Switch): SPI4_PORT0_INTR_RXCH0_EOP_ABORT
Feb 18 00:18:11: %IPCOIR-2-CARD_UP_DOWN: Card in slot 2/1 is up. Notifying 2cable-dtcc driver.
Feb 18 00:18:11: %IPCOIR-2-CARD_UP_DOWN: Card in slot 1/1 is up. Notifying 2cable-dtcc driver.
SLOT 5/0: Feb 18 00:18:07: %IPCGRP-6-IBENBDISAB: IronBus interface disabled Primary PRE A
SLOT 5/1: Feb 18 00:18:07: %IPCGRP-6-IBENBDISAB: IronBus interface disabled Primary PRE A
SLOT 6/0: Feb 18 00:18:08: %IPCGRP-6-IBENBDISAB: IronBus interface disabled Primary PRE A
SLOT 7/1: Feb 18 00:18:08: %IPCGRP-6-IBENBDISAB: IronBus interface disabled Primary PRE A
SLOT 6/1: Feb 18 00:18:08: %IPCGRP-6-IBENBDISAB: IronBus interface disabled Primary PRE A
Feb 18 00:18:14: %UBR10KTCC-5-DTISLOT: DTCC slot 1/1: card role changed to Active
Feb 18 00:18:14: %UBR10KTCC-5-DTISLOT: DTCC slot 2/1: card role changed to Standby
SLOT 6/0: Feb 18 00:18:12: %CR10K_CLNT-3-IPCTXERR: IPC send failure: client=5 entity=0 ses=6/0 msg=6 err=timeout
SLOT 6/0: Feb 18 00:18:12: %REQGRP-3-RPCREQ: RPC blocked message for client 5 entity 0 (slot6/0): RPC blocked message timeout waiting for ACK/RPC Reply.
SLOT 5/0: Feb 18 00:18:13: %IPCGRP-6-IBENBDISAB: IronBus interface enabled Primary PRE A
SLOT 5/1: Feb 18 00:18:13: %IPCGRP-6-IBENBDISAB: IronBus interface enabled Primary PRE A
SLOT 6/0: Feb 18 00:18:14: %IPCGRP-6-IBENBDISAB: IronBus interface enabled Primary PRE A
SLOT 6/1: Feb 18 00:18:14: %IPCGRP-6-IBENBDISAB: IronBus interface enabled Primary PRE A
SLOT 7/1: Feb 18 00:18:14: %IPCGRP-6-IBENBDISAB: IronBus interface enabled Primary PRE A
SLOT 5/0: Feb 18 00:18:13: Nickel10g - Waxbill SPI port is in sync
SLOT 5/1: Feb 18 00:18:13: Nickel10g - Waxbill SPI port is in sync
SLOT 6/1: Feb 18 00:18:14: Nickel10g - Waxbill SPI port is in sync
SLOT 7/1: Feb 18 00:18:14: Nickel10g - Waxbill SPI port is in sync
SLOT 6/0: Feb 18 00:18:14: Nickel10g - Waxbill SPI port is in sync
Feb 18 00:18:16: %LINK-3-UPDOWN: Interface HTDP0/0/1, changed state to up
Feb 18 00:18:17: %LINEPROTO-5-UPDOWN: Line protocol on Interface HTDP0/0/1, changed state to up
Feb 18 00:18:19: %C10K_TOASTER-6-STARTPXF:
!!pxf clients started, forwarding code operational!!
Feb 18 00:18:20: %SYS-3-HARIKARI: Process CR10K DTI upgrade process top-level routine exited
Feb 18 00:18:26: %C10KEVENTMGR-3-NOPRESWITCHOVER: No PRE switchover due to PXF fault: PXF restart is within holddown interval
Thanks
