We have 2 DSL links from same SP at two different sites with one acting as primary and second link need to be configured as redundant to the primary link. i.e if primary goes down the secondary dsl link should become primary and take over.
2 DSL links in ethernet from SP firewall terminate on client firewall.
Howz is this possible? Any ideas would be appreciated.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...