High cpu when change "mls cef maximum-route ip" to more than 512K
From cisco document 6500-sup720 and 7600-rsp720 are support IPv4 unicast and MPLS—512,000 routes by default. On my network we have route more than 400K which nearly reach to the limit then I tried to change from 512K to 1007K as below.
Router#sh mls cef maximum-routes
FIB TCAM maximum routes :
IPv4 - 1007k
MPLS - 1k
IPv6 + IP Multicast - 8k (default)
After rebooted I got high cpu issue on both 6500-sup720 and 7600-rsp720 then I tried to tuning to other value such as 600K , 700K and so on but doesn't help.
- I have no cpu issue with default value for mls cef maximum-route
- I have cpu issue when tuning to other value such as 600K , 700K
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on Application Engineered...
Internet security is important with the increasing attacks that are happening every day. Many internet and browsing security solutions exist, but some are not very easy to use or maybe the question is how can I enable them?
Cisco Software Manager Server
This document describes the programmatic interfaces, RESTful APIs, which are supported by Cisco Software Manager Server (CSM Server).
CSM Server supports a set of finite RESTful APIs. The fir...