Hello,
I'm using SCE8000 with all SCOS, SCA BB and CM using version 3.8.5.
I was trying but I couldn't find how to enable reports based on:
RPT_TOP_HTTP_DOMAINS
RPT_TOP_HTTP_HOSTS
RPT_TOP_VIDEO_DOMAINS
RPT_TOP_VIDEO_HOSTS
All these next tables are empty and I don't know how to start receving records:
`RPT_TOP_APN`
`RPT_TOP_DEVICE_TYPE`
`RPT_TOP_HOME_AGENT`
`RPT_TOP_HTTP_DOMAINS`
`RPT_TOP_HTTP_HOSTS`
`RPT_TOP_MEID`
`RPT_TOP_NETWORK_TYPE`
`RPT_TOP_PCF`
`RPT_TOP_SGSN`
`RPT_TOP_USER_LOCATION`
`RPT_TOP_VIDEO_DOMAINS`
`RPT_TOP_VIDEO_HOSTS`
I know that some tables are related to mobile networks but I would like to receive records in the others.
I was reading many documents:
In section Real-Time Aggregating Adapter (Cisco Collection Manager User Guide, Chapter Collection Manager Overview) says that I need the RAG adapter to enable top http and video reports
I have anabled RAG adapter in cm.conf:
# comment-out the "adapter.1" line if you won't be updating a DB
adapter.1=com.cisco.scmscm.adapters.jdbc.JDBCAdapter
#adapter.2=com.cisco.scmscm.adapters.CSVAdapter
adapter.3=com.cisco.scmscm.adapters.topper.TAAdapter
adapter.4=com.cisco.scmscm.adapters.rag.RAGAdapter
#adapter.5=com.cisco.scmscm.adapters.custom.CustomAdapter
[adapter_mem]
com.cisco.scmscm.adapters.topper.TAAdapter=-Xmx2048M
com.cisco.scmscm.adapters.rag.RAGAdapter=-Xmx2048M
In ragadapter directory I have the http_TUR.xml and video_TUR.xml and ragadapter.xml:
/cm/scmscm/cm/config/ragadapter
-bash-4.1$ ll
total 36
-rwxr-xr--. 1 scmscm scmscm 4378 Nov 8 2012 http_TURs.xml
-rwxr-xr--. 1 scmscm scmscm 730 Nov 8 2012 ragadapter.xml
drwxr-xr--. 2 scmscm scmscm 4096 Nov 8 2012 repository
-rwxr-xr--. 1 scmscm scmscm 4378 Nov 8 2012 video_TURs.xml
-rwxr-xr--. 1 scmscm scmscm 2037 Nov 8 2012 vlink_BW_per_pkg.xml
-rwxr-xr--. 1 scmscm scmscm 5221 Nov 8 2012 vsa_SURs.xml
-bash-4.1$
In some part (I don't remember the document) I've seen that I need to enable OnlineFlowUsageRDR by typing:
CA-SCE-B(config)#>int li 0
CA-SCE-B(config if)#>tunable GT_REP_OnlineFlowUsageRDR_Enable value true
CA-SCE-B(config if)#>end
CA-SCE-B#>copy running-config-application startup-config-application
Writing application configuration file to temporary location...
Removing old application configuration file...
Renaming temporary application configuration file with the final file's name...
CA-SCE-B#>
In queue.conf I have the next configuration for RAG Adapter:
# RAG Adapter
[rag-hi]
adapter_id=4
priority=3
warning_size=40000
maximum_size=50000
tags=4042321920,4042323004,4042323072
So, what's wrong?
Do I need to add other tags in RAG Adapter section of queue.conf?
Do I need to enable any specific RDR from any SCA BB Console or SCE cli?
Which RDRs are involved on thess reports I need?
Thank you very much in advance.
Best Regards,
Alejandro D'Egidio
