What you are describing doesn't sound normal. You shouldn't see XR Failure in the "show platform". You can see an MSC or other cards take multiple reboots before coming up depending on code previously on it and the code running on the CRS now. Can you put up a snippet of the "show logging" where we see the card fail to come up? Do you see something in the log where it says it failed?
Taking multiple reboots before coming up is normal. But my problem is, at one stage of booting process MSC hangs on the state of "MBI-Booting" and shows "IOS-XR failure" for the command "show platform".
This failure is shown after the following message in the console..
shelfmgr: %PLATFORM-SHELFMGR-2-NODE_REBOOT_RECEIVED : Node 0/5/SP about to reboot due to cause code:0x44, Cause: self-reset to use new boot image
IntroductionSNMP Vs TelemetryUse casesConfigurationVerificationTelemetry Debugging:Setting up the collector (pipeline client)Configure PipelinePipeline execution
The objective of this document is to enable you to c...
Monitoring NP load utilization
Many times you want to know the load of the npu and this functionality enables you to verify NP utilization or NP performance load. This helps you to perform load balancing based on NP utilization. To address this a ...
Question: Have the phone connected and can ring out-but no sound coming from the handset - analog home phone - phone makes connection and pick up at the other end is ok. Can you help?