Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

IOS XR Layer 2 internetworking and layer 2 local switching

I have 12410 with iox 3.6.1 and sip 501 with spa-5GE I want to configure layer 2 vpns for internetworking and layer 2 local switching. I search in the command reference and I didnt find the connect command nor internetwork ip under the PW class. can any one tell me how to configure it

3 REPLIES
Cisco Employee

Re: IOS XR Layer 2 internetworking and layer 2 local switching

Hi,

Here is an example for local switching:

RP/0/1/CPU0:router(config-if)#l2vpn

RP/0/1/CPU0:router(config-l2vpn)#xconnect group local

RP/0/1/CPU0:router(config-l2vpn-xc)#p2p ac1

RP/0/1/CPU0:router(config-l2vpn-xc-p2p)#interface gi0/3/0/0

RP/0/1/CPU0:router(config-l2vpn-xc-p2p)#interface gi0/3/0/1

RP/0/1/CPU0:router(config-l2vpn-xc-p2p)#commit

RP/0/1/CPU0:router(config-l2vpn-xc-p2p)#end

Any-2-Any connection type required 3.8

HTH

Laurent.

New Member

Re: IOS XR Layer 2 internetworking and layer 2 local switching

thank a lot Laurent you helped me a lot. I searched a lot in cisco for any example with no hope. so the following is true

local switching supported for gigaeth

any to any local switching supported in 3.8

does also any to any between two different platforms ( XR and 7200) specificaly vlan on XR and atm on 7200 will require 3.8 also ?

thanks in advance

Cisco Employee

Re: IOS XR Layer 2 internetworking and layer 2 local switching

You are correct. Any to any connection (local switching or not) requires 3.8:

Please refer to the following links for more details:

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps8803/ps5845/product_bulletin_c25-534342.html

(search for "AToM IP Interworking")

HTH

Laurent.

717
Views
0
Helpful
3
Replies
CreatePlease login to create content