I have a UBR 7246VXR with MC16C line cards in it. They are tied to a bundled interface. I have removed cable line card 4/0 from the bundle and tried to assign as IP address to it, but it says "IP addresses may not be configured on L2 links". I have never seen this before. Anyone know how to fix this?
Well I found the answer to this one so I thought I would share it:
As of Cisco IOS Release 12.3(21)BC, all cable line cards are automatically part of virtual bundles. Removing a line card from one bundle means it has to be configured as part of another virtual bundle.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...