Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

packet loss

Can someone please advise what could be the best possible tests to do packet loss test -end to end in general scenario where we have WAN Devices connected serially and running frame.

Like there is no other hope in between an can be just two 1841 s connected .

Sent from Cisco Technical Support iPhone App

1 REPLY

Re: packet loss

Hi Tarun,

Send some pings with massive and incrementing packet sizes. Try with do not fragment bit set and see if the success rate is 100%

ping repeat 10000 size <100-1500> df-bit

You can start with  size 100 and then slowly increase it to 1500. Alternatively you can use something called a ping sweep which is an extended ping. You can see the link below for more info. Let me know if you want more info

http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080093f22.shtml

HTH

Kishore

633
Views
0
Helpful
1
Replies
CreatePlease login to create content