07-20-2013 04:10 AM - edited 03-01-2019 02:41 PM
hi all ,
i have MLS cisco 7604 ,
i tried to use QOS to dedicate cir for specific subnet , but it failed , it seems that bandwidth command dont work on that platform !!!
my 1st question eis can i apply QOS and use bandwidth command ??? is it impossible ????
=============================================================================================
my 2nd question is ,
i have 600 M as total download traffic ,
i want to limit the bw on the interface from 600M to 520 M
i configured the following :
================================================
Gateway7600#
sh ip access-lists drvirus
Extended IP access list drvirus
10 deny ip any x.x.x.0 0.0.0.31 (1802 matches)
20 permit ip any any (2507719 matches)
=================================================
Gateway7600#
sh class-map drvirus
Class Map match-all drvirus (id 4)
Match access-group name drvirus
===================================================
Gateway7600#
sh policy-map drvirus
Policy Map drvirus
Class drvirus
police cir 500000000 bc 93750000 be 187500000
conform-action transmit
exceed-action drop
violate-action drop
====================================================
Gateway7600#
sh running-config interface gigabitEthernet 1/5
Building configuration...
Current configuration : 258 bytes
!
interface GigabitEthernet1/5
description 7600to7200
mac-address 503d.e5af.9c45
ip address 172.30.40.2 255.255.255.252
ip wccp 70 redirect in
ip wccp 90 redirect in
load-interval 30
service-policy input drvirus
service-policy output rateupload
end
==========================================================================
but when i try to put under the interface level ,
service-policy input drvirus
it fails and give me the error ===>
Gateway7600(config-if)#service-policy input drvirus
burst (bc) must be between 1000 and 31250000 for this interface
Configuration failed on GigabitEthernet1/5
i tried another trial ,
i changed police cir from
police cir 500000000 bc 93750000 be 187500000
to ===>
police cir 500000000 bc 250000 be 1000
after that , it was accepted under the interface command.
but i dont see any limitation in bw !!!!!!!
wish to help me =============?
================================================
i have the following speifications :
Gateway7600#sh module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 9 Supervisor Engine 32 8GE (Active) WS-SUP32-GE-3B SAD104204GX
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ----- ------------- ------------ -------
1 0018.bad2.2324 to 0018.bad2.232f 4.4 12.2(18r)SX 15.2(4) Ok
Mod Sub-Module Model Serial Hw Status
---- --------------------------- ------------------ ----------- ------- -------
1 Policy Feature Card 3 WS-F6K-PFC3B SAD104201HK 2.3 Ok
1 Cat6k MSFC 2A daughterboard WS-F6K-MSFC2A SAD104004UC 3.1 Ok
Mod Online Diag Status
---- -------------------
1 Pass
===================================================================
Gateway7600#sh version
Cisco IOS Software, c7600s3223_rp Software (c7600s3223_rp-ADVENTERPRISEK9-M), Version 15.2(4)S, RELEASE SOFTWARE (fc1)
Technical Support:
http://www.cisco.com/techsupport
Copyright © 1986-2012 by Cisco Systems, Inc.
Compiled Fri 20-Jul-12 18:18 by prod_rel_team
ROM: System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)
BOOTLDR: Cisco IOS Software, c7600s3223_rp Software (c7600s3223_rp-ADVENTERPRISEK9-M), Version 15.2(4)S, RELEASE SOFTWARE (fc1)
Gateway7600 uptime is 32 weeks, 7 hours, 6 minutes
Uptime for this control processor is 13 weeks, 7 hours, 10 minutes
System returned to ROM by power-on (SP by power-on)
System restarted at 06:26:11 UTC Sat Apr 20 2013
System image file is "sup-bootdisk:c7600s3223-adventerprisek9-mz.152-4.S.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
cisco CISCO7604 (R7000) processor (revision 2.0) with 458752K/65536K bytes of memory.
Processor board ID FOX1509G2DK
R7000 CPU at 300MHz, Implementation 39, Rev 3.3, 256KB L2, 1024KB L3 Cache
Last reset from power-on
1 Virtual Ethernet interface
9 Gigabit Ethernet interfaces
1915K bytes of non-volatile configuration memory.
65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
===================================================================================
07-31-2013 01:21 AM
any suggestion ??? any help ???
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: