Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Rate-Limit on a Vlan between two hosts

I am trying to limit two hosts to 5megs from 8:30am-11:59p and to 10megs from 0:01-8:00. Below is what what I have on for my rate-limit setup. The acl's and Time-range have been left out

rate-limit output access-group 101 5000000 1000000 1000000 conform-action transmit exceed-action drop

rate-limit output access-group 102 10000000 1000000 1000000 conform-action transmit exceed-action drop

matches: access-group 101

params: 5000000 bps, 1000000 limit, 1000000 extended limit

conformed 14396395 packets, 12143M bytes; action: transmit

exceeded 168559 packets, 254008659 bytes; action: drop

last packet: 12ms ago, current burst: 720095 bytes

last cleared 22:14:25 ago, conformed 1213000 bps, exceeded 25000 bps

Looks to me Acl-101 is working. I can't seem to get a clear explanation what the "1000000" "1000000" are. Are those the peak "burst" limits of 1meg or have I limited my endpoint to actually only 1meg? Any link here on CCO to clear this up would be appreciated. Thanks

1 REPLY
Cisco Employee

Re: Rate-Limit on a Vlan between two hosts

Hi,

These numbers represent your Normal Burst and exceed burst values.

You will have detailed explanation here:

http://www.cisco.com/en/US/docs/ios/qos/configuration/guide/polcing_shping_oview_ps6922_TSD_Products_Configuration_Guide_Chapter.html#wp1000977

Let me know if you need further explanation.

HTH

Laurent.

182
Views
0
Helpful
1
Replies