I have managed SCE for many years since Pcube age. Recently a customer wants to use as many as 200+ packages on their SCE. We found out that although you can configure as many as 4999 package ids on BBconsole, but actually when you relly apply it, the SCE won't accept above 199.
I have no idea why the BBconsole give such huge numbers to use.
On the other hand, even you make a configure policy that shrink the package less than 199 pkgs. Then you applied policy to SCE, and next you check the "show interfacce linecard 0 subscriber " for packageID 64 and above, there will not have any subscriber map to the ID above 64. Subscriber above 64 users will all be mapped to package 0. Why??
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...