Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

SCE pcube-SE-MIB traffic-counters error

Hi,

On both the SCE 1010 and SCE 2020, I am seeing the following error:

#sh snmp MIB pcube-SE-MIB traffic-counters

Error - internal error: was not able to retreive Traffic-Counter information

I am running the following version:

#sh ver

System version: Version 3.6.1 Build 13

Build time: Jul 25 2010, 23:45:29 (Change-list 631208)

Software version is: Version 3.6.1 Build 13

Does anyone know why traffic-counters is returning this error when all of the other pcube-SE-MIB sub-options work?

#sh snmp MIB pcube-SE-MIB subscriber

subscribersNumIntroduced = 0

subscribersNumFree = 199999

subscribersNumIpAddrMappings = 0

subscribersNumIpAddrMappingsFree = 200000

subscribersNumIpRangeMappings = 0

subscribersNumIpRangeMappingsFree = 7972

subscribersNumVlanMappings = 0

subscribersNumVlanMappingsFree = 0

subscribersNumTpIpRanges = 0

subscribersNumTpIpRangesFree = 0

subscribersNumActive = 0

subscribersNumActivePeak = 1

subscribersNumActivePeakTime = 5 weeks, 5 days, 7 hours, 58 minutes, 16 seconds

subscribersNumUpdates = 2

subscribersCountersClearTime = 5 weeks, 5 days, 8 hours, 1 minutes, 28 seconds

subscribersNumAnonymous = 0

Regards, Brett.

Everyone's tags (5)
1 REPLY
Cisco Employee

Re: SCE pcube-SE-MIB traffic-counters error

Hi  Brett,

Did you configure traffic-counter on SCE ?

If there is no configuration of traffic-counter, you can see this error.

Can you try to configure as following ?

SCE2000#>conf

SCE2000(config)#>interface LineCard 0

SCE2000(config if)#>traffic-counter name test count-bytes

SCE2000(config if)#>end                                  

SCE2000#>show snmp MIB pcube-SE-MIB traffic-counters

trafficCounterIndex.1.1 = 1                        

trafficCounterValue.1.1 = 0

trafficCounterName.1.1  = test

trafficCounterType.1.1  = bytes

Error - internal error: was not able to retreive Traffic-Counter information

SCE2000#>

Thanks,

Keita

809
Views
0
Helpful
1
Replies
CreatePlease to create content