I am deploying a service control solution for an enterprise that want to monitor and control the bandwidth utilization. The solution contains a SCE, CM, SM, MySQL DB and Console SCA BB machine. I need to develop usage reports per subnet. I tried to create a subscriber for each subnet. I was surprised to find that from the SCA BB console subscriber manager GUI tool, I can only add subscribers with /32 mask IP addresses. All the documentation tells that I can map an IP range (for example 10.1.0.0/16) to a subscriber ID. If I did so, the subscriber is not created in the SM database. The only way for me to add a subscriber to the SM database is to make it /32 host address.
Anyhelp with this? I need to develop reports per subnet.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...