Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SCE8000

Hello.

At SCE8000 error occurs:

Interrupt Received from: NalaDPT[0].Tx[0].CTX_ISR.ECCSingleErrorInt -  description: RLDRAM ECC single bit error interrupt   - count: 1

Interrupt Received from:  NalaDPT[0].Tx[0].CTX_ISR.ECCSingleErrorInt - description: RLDRAM ECC  single bit error interrupt   - count: 2

Interrupt Received from:  NalaDPT[0].Tx[0].CTX_ISR.ECCSingleErrorInt - description: RLDRAM ECC  single bit error interrupt   - count: 3

Interrupt Received from:  NalaDPT[0].Tx[0].CTX_ISR.ECCSingleErrorInt - description: RLDRAM ECC  single bit error interrupt   - count: 4

etc..

Sometimes there is an error "Interrupt Received from: NalaDPT[0].Tx[0].CTX_ISR.ECCMultiErrorInt - description: RLDRAM ECC multi bit error interrupt

" and the device reboots.

SCE8000-SIP was replaced. SPA-8X1GE-V2 was also replaced. Problems with the device continues.

In what could be the problem?

Thanks.

2 REPLIES
New Member

Re: SCE8000

Did you solve problem?

New Member

SCE8000

After upgrade SCOS 3.8.5 to 4.0.0 the problem went away for a while. But today the problems started again:

Interrupt Received from: NalaDPT[0].Tx[0].CTX_ISR.ECCSingleErrorInt - description: RLDRAM ECC single bit error interrupt   - count: 0
Interrupt Received from: NalaDPT[0].Tx[0].CTX_ISR.ECCSingleErrorInt - description: RLDRAM ECC single bit error interrupt   - count: 1
Interrupt Received from: SimbaDPT[0].Tx[0].CTX_ISR.ECCSingleErrorInt - description: RLDRAM ECC single bit error interrupt   - count: 0
Interrupt Received from: SimbaDPT[0].Tx[0].CTX_ISR.ECCSingleErrorInt - description: RLDRAM ECC single bit error interrupt   - count: 1
Interrupt Received from: SimbaDPT[0].Tx[0].CTX_ISR.ECCSingleErrorInt - description: RLDRAM ECC single bit error interrupt   - count: 2
Interrupt Received from: SimbaDPT[0].Tx[0].CTX_ISR.ECCMultiErrorInt - description: RLDRAM ECC multi bit error interrupt 

Maybe it's a software problem, although the error says about the hardware.

I will try to upgrade scos to version 4.1.0.

1130
Views
0
Helpful
2
Replies