Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

setting PPPoE clients speed Via Cisco router

Hi i have a 7200 cisco router working as NAS (network access server) for PPPoE sessions , the clients connected DSLAMS and the Cisco connected to an AAA external Raduis server.

i want to set the user speed Via cisco router in a way which can be controlled in the Radius server , and not through the actual speed of the DSLAMS ports

Thanks alot

1 REPLY
Hall of Fame Super Silver

Re: setting PPPoE clients speed Via Cisco router

Hello Mohamed,

there is a feature called controlled subscriber bandwidth that may fit your needs:

see

http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/bba_con_sub_bdwth_ps6441_TSD_Products_Configuration_Guide_Chapter.html

it manipulates the ATM traffic parameters on a per user basis

these settings can be done on radius AV:

example:

The following example shows how to configure RADIUS attributes for a user profile for DBS:

user1@cisco.com Password = "userpassword1", Service-Type = Outbound
     Service-Type = Outbound,
     Cisco-Avpair = "vpdn:tunnel-id=tunnel33",
     Cisco-Avpair = "vpdn:tunnel-type=l2tp",
     Cisco-Avpair = "vpdn:l2tp-tunnel-password=password2",
     Cisco-Avpair = "vpdn:ip-addresses=172.16.0.0",
     Cisco-Avpair = "atm:peak-cell-rate=155000",
     Cisco-Avpair = "atm:sustainable-cell-rate=155000"

Hope to help
Giuseppe

743
Views
0
Helpful
1
Replies
CreatePlease to create content