cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1196
Views
0
Helpful
0
Replies

want to allow only pppoe session and drop anything else

i have a cisco router working as NAS for pppoe sessions this router is connected to dslam that works as bridge to connect the clients to the pppoe NAS server the problem is when ever a clinet add static ip address it can communcate directly to the router without needing to be authenticated i want the router to allow only the pppoe traffic and drop other traffic thanks alot.....

here is my config

Current configuration : 2136 bytes
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Superlink_47
boot-start-marker
boot-end-marker
enable secret 5 $1$VqFK$NHgEqVGi7CfQ.jJYYe4I/0
aaa new-model
aaa authentication login default enable
aaa authentication ppp adsl group radius
aaa authorization network adsl group radius
aaa accounting delay-start
aaa accounting update newinfo
aaa accounting network adsl start-stop group radius
aaa session-id common
ip cef
ip name-server
ip name-server
multilink bundle-name authenticated

rchive
log config
  hidekeys

bba-group pppoe xxxx
virtual-template 2
vendor-tag circuit-id service
vendor-tag circuit-id strip
sessions per-vlan limit 10000

interface FastEthernet0/0
description To up link
ip address
ip broadcast-address
duplex auto
speed auto

0 Replies 0
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: