I have a test network that I'm setting up and I have a 4507R switch that has a WLC plugged in via a gigabit port. Then I have an access point plugged into the switch. I have setup two WLANs (one public/one private) and for the public one I have configured DHCP on the WLC and then assigned it a new interface with the VLAN I made for it.
The AP is showing the two networks and giving out the addresses, but I can't access the internet with the public one. I also can't ping the other devices like the switch or WLC. With the private network I can get internet but I can't contact the other devices.
The setup is:
switch: 172.16.28.1
255.255.0.0
WLC: 172.16.28.13
255.255.0.0
AP: 172.16.250.225
255.255.0.0
Public: 172.18.1.0
255.255.255.0
Private: 172.16.250.0
255.255.0.0
On the Gigabit port I have trunking on as well.
Can anyone tell me why I can't contact the other devices here and get the internet on the public network?