cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1700
Views
15
Helpful
8
Replies

01#Aironet 1600 (AIR-CAP1602i) & 3850 WLC (WS-C3850-24T-L)

smsabetsm
Level 1
Level 1

Hi Friends

Trying to join 1602i (AIR-CAP1602i-E-k9) to 3850 (WS-C3850-24T) WLC but after join to WLC, the access point keeps rebooting

 

3850# Sho Version

Cisco IOS Software, IOS-XE Software, Catalyst L3 Switch Software (CAT3K_CAA-UNIV
ERSALK9-M), Version 03.03.03SE RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Sun 27-Apr-14 18:33 by prod_rel_team

 

Cisco IOS-XE software, Copyright (c) 2005-2014 by cisco Systems, Inc.
All rights reserved.  Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0.  The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY.  You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0.
(http://www.gnu.org/licenses/gpl-2.0.html) For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.

 

ROM: IOS-XE ROMMON
BOOTLDR: C3850 Boot Loader (C3850-HBOOT-M) Version 1.1, RELEASE SOFTWARE (P)

Ctrl1 uptime is 59 minutes
Uptime for this control processor is 1 hour, 1 minute
System returned to ROM by reload
System image file is "flash:packages.conf"
Last reload reason: reload

 

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

License Level: Ipbase
License Type: Permanent
Next reload license Level: Ipbase

cisco WS-C3850-24T (MIPS) processor with 4194304K bytes of physical memory.
Processor board ID FOC1729V00P
1 Virtual Ethernet interface
28 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
2048K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
250456K bytes of Crash Files at crashinfo:.
1609272K bytes of Flash at flash:.
0K bytes of Dummy USB Flash at usbflash0:.
0K bytes of  at webui:.

Base Ethernet MAC Address          : d0:c7:89:74:ef:00
Motherboard Assembly Number        : 73-12238-06
Motherboard Serial Number          : FOC17283XTY
Model Revision Number              : B0
Motherboard Revision Number        : D0
Model Number                       : WS-C3850-24T
System Serial Number               : FOC1729V00P


Switch Ports Model              SW Version        SW Image              Mode
------ ----- -----              ----------        ----------            ----
*    1 32    WS-C3850-24T       03.03.03SE        cat3k_caa-universalk9 INSTALL


Configuration register is 0x102

3850#show wireless mobility summary

Mobility Controller Summary:

Mobility Role                                   : Mobility Controller
Mobility Protocol Port                          : 16666
Mobility Group Name                             : default
Mobility Oracle IP Address                      : 0.0.0.0
DTLS Mode                                       : Enabled
Mobility Domain ID for 802.11r                  : 0xac34
Mobility Keepalive Interval                     : 10
Mobility Keepalive Count                        : 3
Mobility Control Message DSCP Value             : 48
Mobility Domain Member Count                    : 1

Link Status is Control Link Status : Data Link Status

Controllers configured in the Mobility Domain:

IP               Public IP        Group Name       Multicast IP     Link Status
-------------------------------------------------------------------------------
192.168.188.22   -                default          0.0.0.0          UP   : UP

 

3850#show wireless country configured

 Configured Country.............................: AU  - Australia
 Configured Country Codes
        AU  - Australia : 802.11a Indoor,Outdoor/ 802.11b / 802.11g

 

1602i#show version
Cisco IOS Software, C1600 Software (AP1G2-K9W8-M), Version 15.2(4)JB5h, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Wed 16-Apr-14 00:32 by prod_rel_team

ROM: Bootstrap program is C1600 boot loader
BOOTLDR: C1600 Boot Loader (AP1G2-BOOT-M) LoaderVersion 15.2(2)JAX, RELEASE SOFT
WARE (fc1)

APc067.af86.55a3 uptime is 7 minutes
System returned to ROM by power-on
System image file is "flash:/ap1g2-k9w8-mx.152-4.JB5h/ap1g2-k9w8-mx.152-4.JB5h"
Last reload reason:

 

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-CAP1602I-E-K9 (PowerPC) processor (revision B0) with 229366K/32768K by
tes of memory.
Processor board ID FGL1739W06Y
PowerPC CPU at 533MHz, revision number 0x2151
Last reset from power-on
LWAPP image version 10.1.130.0
1 Gigabit Ethernet interface
2 802.11 Radios

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: C0:67:AF:86:55:A3
Part Number                          : 73-14671-04
PCA Assembly Number                  : 000-00000-00
PCA Revision Number                  :
PCB Serial Number                    : FOC17374QRS
Top Assembly Part Number             : 800-38552-01
Top Assembly Serial Number           : FGL1739W06Y
Top Revision Number                  : A0
Product/Model Number                 : AIR-CAP1602I-E-K9

 

Configuration register is 0xF

 

3850# Show logging

Ctrl1#
*Jun 14 05:37:44.747: *%CAPWAP-3-ALREADY_IN_JOIN: 1 wcm:  Dropping join request
from AP c025.5c96.90e0 - AP is already in joined state
*Jun 14 05:37:44.750: *%CAPWAP-3-DATA_TUNNEL_DELETE_ERR2: 1 wcm:  Failed to dele
te CAPWAP data tunnel with interface id: 0x0 from internal database. Reason: AVL
 database entry not found
*Jun 14 05:37:50.040: *%CAPWAP-3-ALREADY_IN_JOIN: 1 wcm:  Dropping join request
from AP c025.5c96.90e0 - AP is already in joined state
*Jun 14 05:37:50.042: *%CAPWAP-3-DATA_TUNNEL_DELETE_ERR2: 1 wcm:  Failed to dele
te CAPWAP data tunnel with interface id: 0x0 from internal database. Reason: AVL
 database entry not found
*Jun 14 05:38:05.467: *%CAPWAP-3-ALREADY_IN_JOIN: 1 wcm:  Dropping join request
from AP c025.5c96.90e0 - AP is already in joined state
*Jun 14 05:38:05.470: *%CAPWAP-3-DATA_TUNNEL_DELETE_ERR2: 1 wcm:  Failed to dele
te CAPWAP data tunnel with interface id: 0x0 from internal database. Reason: AVL
 database entry not found
*Jun 14 05:38:10.760: *%CAPWAP-3-ALREADY_IN_JOIN: 1 wcm:  Dropping join request
from AP c025.5c96.90e0 - AP is already in joined state
*Jun 14 05:38:10.762: *%CAPWAP-3-DATA_TUNNEL_DELETE_ERR2: 1 wcm:  Failed to dele
te CAPWAP data tunnel with interface id: 0x0 from internal database. Reason: AVL
 database entry not found
*Jun 14 05:38:26.672: *%CAPWAP-3-ALREADY_IN_JOIN: 1 wcm:  Dropping join request
from AP c025.5c96.90e0 - AP is already in joined state
*Jun 14 05:38:26.675: *%CAPWAP-3-DATA_TUNNEL_DELETE_ERR2: 1 wcm:  Failed to dele
te CAPWAP data tunnel with interface id: 0x0 from internal database. Reason: AVL
 database entry not found
*Jun 14 05:38:31.968: *%CAPWAP-3-ALREADY_IN_JOIN: 1 wcm:  Dropping join request
from AP c025.5c96.90e0 - AP is already in joined state
*Jun 14 05:38:31.970: *%CAPWAP-3-DATA_TUNNEL_DELETE_ERR2: 1 wcm:  Failed to dele
te CAPWAP data tunnel with interface id: 0x0 from internal database. Reason: AVL
 database entry not found
*Jun 14 05:38:47.388: *%CAPWAP-3-ALREADY_IN_JOIN: 1 wcm:  Dropping join request
from AP c025.5c96.90e0 - AP is already in joined state
*Jun 14 05:38:47.390: *%CAPWAP-3-DATA_TUNNEL_DELETE_ERR2: 1 wcm:  Failed to dele
te CAPWAP data tunnel with interface id: 0x0 from internal database. Reason: AVL
 database entry not found
*Jun 14 05:38:52.680: *%CAPWAP-3-ALREADY_IN_JOIN: 1 wcm:  Dropping join request
from AP c025.5c96.90e0 - AP is already in joined state
*Jun 14 05:38:52.682: *%CAPWAP-3-DATA_TUNNEL_DELETE_ERR2: 1 wcm:  Failed to dele
te CAPWAP data tunnel with interface id: 0x0 from internal database. Reason: AVL
 database entry not found
*Jun 14 05:39:08.100: *%CAPWAP-3-ALREADY_IN_JOIN: 1 wcm:  Dropping join request
from AP c025.5c96.90e0 - AP is already in joined state
*Jun 14 05:39:08.102: *%CAPWAP-3-DATA_TUNNEL_DELETE_ERR2: 1 wcm:  Failed to dele
te CAPWAP data tunnel with interface id: 0x0 from internal database. Reason: AVL
 database entry not found
*Jun 14 05:39:13.396: *%CAPWAP-3-ALREADY_IN_JOIN: 1 wcm:  Dropping join request
from AP c025.5c96.90e0 - AP is already in joined state
*Jun 14 05:39:13.398: *%CAPWAP-3-DATA_TUNNEL_DELETE_ERR2: 1 wcm:  Failed to dele
te CAPWAP data tunnel with interface id: 0x0 from internal database. Reason: AVL
 database entry not found
*Jun 14 05:39:29.024: *%CAPWAP-3-ALREADY_IN_JOIN: 1 wcm:  Dropping join request
from AP c025.5c96.90e0 - AP is already in joined state
*Jun 14 05:39:29.026: *%CAPWAP-3-DATA_TUNNEL_DELETE_ERR2: 1 wcm:  Failed to dele
te CAPWAP data tunnel with interface id: 0x0 from internal database. Reason: AVL
 database entry not found
*Jun 14 05:39:34.320: *%CAPWAP-3-ALREADY_IN_JOIN: 1 wcm:  Dropping join request
from AP c025.5c96.90e0 - AP is already in joined state
*Jun 14 05:39:34.322: *%CAPWAP-3-DATA_TUNNEL_DELETE_ERR2: 1 wcm:  Failed to dele
te CAPWAP data tunnel with interface id: 0x0 from internal database. Reason: AVL
 database entry not found
*Jun 14 05:39:46.377: *%DTLS-3-HANDSHAKE_FAILURE: 1 wcm:  Failed to complete DTL
S handshake with peer 192.168.188.25  for AP 0000.0000.0000Reason: sslv3 alert u
nexpected message

 

 

1602i# Show Logging

Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)

*Mar  1 00:01:01.591: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL
LER
*Mar  1 00:01:01.591: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led sta
te 255
*Mar  1 00:01:02.011: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up

*Mar  1 00:01:02.247: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up

*Mar  1 00:01:08.315: %SSH-5-ENABLED: SSH 2.0 has been enabledlwapp_crypto_init:
 MIC Present and Parsed Successfully

*Mar  1 00:01:09.075: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r
eset
*Mar  1 00:01:09.075: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to r
eset
*Mar  1 00:01:18.755: Logging LWAPP message to 255.255.255.255.

*Mar  1 00:01:29.255: APAVC: Succeeded to activate all the STILE protocols.

*Mar  1 00:01:29.255: APAVC: Registering with CFT
APAVC: CFT registration of delete callback succeeded
APAVC: Reattaching  Original Buffer pool for system use
Pool-ReAtach: paks 9355 radio8747

*Mar  1 00:01:36.415: %CDP_PD-4-POWER_OK: Full power - INJECTOR_CONFIGURED_ON_SO
URCE inline power source
*Mar  1 00:01:37.487: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up

*Mar  1 00:01:38.487: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to up
*Mar  1 00:01:38.543: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up

*Mar  1 00:01:39.206: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Jun 14 05:47:22.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i
p: 192.168.188.22 peer_port: 5246
*Jun 14 05:47:22.335: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
1, changed state to up
*Jun 14 05:47:24.287: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully
 peer_ip: 192.168.188.22 peer_port: 5246
*Jun 14 05:47:24.287: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.188.22

*Jun 14 05:47:29.287: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.188.22

*Jun 14 05:47:29.291: %DTLS-5-ALERT: Received WARNING : Close notify alert from
192.168.188.22
*Jun 14 05:47:29.291: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192
.168.188.22:5246
*Jun 14 05:47:29.291: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Jun 14 05:47:22.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i
p: 192.168.188.22 peer_port: 5246
*Jun 14 05:47:22.291: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully
 peer_ip: 192.168.188.22 peer_port: 5246
*Jun 14 05:47:22.291: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.188.22

*Jun 14 05:47:27.291: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.188.22

*Jun 14 05:47:27.295: %DTLS-5-ALERT: Received WARNING : Close notify alert from
192.168.188.22
*Jun 14 05:47:27.295: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192
.168.188.22:5246
*Jun 14 05:47:27.347: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led sta
te 255
*Jun 14 05:47:27.375: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to a
dministratively down
*Jun 14 05:47:27.375: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to a
dministratively down
*Jun 14 05:47:27.379: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up

*Jun 14 05:47:27.431: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up

*Jun 14 05:47:28.379: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to down
*Jun 14 05:47:28.423: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to do
wn
*Jun 14 05:47:28.431: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to r
eset
*Jun 14 05:47:29.415: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to up
*Jun 14 05:47:29.423: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
1, changed state to down
*Jun 14 05:47:29.467: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up

*Jun 14 05:47:29.475: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to do
wn
*Jun 14 05:47:29.483: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r
eset
*Jun 14 05:47:30.467: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
1, changed state to up
*Jun 14 05:47:30.475: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to down
*Jun 14 05:47:30.519: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up

*Jun 14 05:47:31.519: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to up
*Jun 14 05:47:37.431: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Jun 14 05:47:44.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i
p: 192.168.188.22 peer_port: 5246
*Jun 14 05:47:44.287: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully
 peer_ip: 192.168.188.22 peer_port: 5246
*Jun 14 05:47:44.287: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.188.22

*Jun 14 05:47:49.287: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.188.22

*Jun 14 05:47:49.291: %DTLS-5-ALERT: Received WARNING : Close notify alert from
192.168.188.22
*Jun 14 05:47:49.291: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192
.168.188.22:5246

 

 

2 Accepted Solutions

Accepted Solutions

Leo Laohoo
Hall of Fame
Hall of Fame
 Configured Country.............................: AU  - Australia
 Product/Model Number                 : AIR-CAP1602I-E-K9

Not going to work.  If you want AP for Australia, you need a regulatory domain of "-Z".  

View solution in original post

8 Replies 8

Leo Laohoo
Hall of Fame
Hall of Fame
 Configured Country.............................: AU  - Australia
 Product/Model Number                 : AIR-CAP1602I-E-K9

Not going to work.  If you want AP for Australia, you need a regulatory domain of "-Z".  

Hi Leo

For product AIR-CAP1602I-E-K9 what country have to configured?

flowed this table:

change country to turkry

3850# show wireless country configured

 Configured Country.............................: TR  - Turkey
 Configured Country Codes
        TR  - Turkey : 802.11a Indoor,Outdoor/ 802.11b / 802.11g

but ap Not going to work.crying

3850#

*Jun 14 12:14:16.492: *%CAPWAP-3-ALREADY_IN_JOIN: 1 wcm:  Dropping join request
from AP c025.5c96.90e0 - AP is already in joined state
*Jun 14 12:14:16.496: *%CAPWAP-3-DATA_TUNNEL_DELETE_ERR2: 1 wcm:  Failed to dele
te CAPWAP data tunnel with interface id: 0x0 from internal database. Reason: AVL
 database entry not found
*Jun 14 12:14:31.916: *%CAPWAP-3-ALREADY_IN_JOIN: 1 wcm:  Dropping join request
from AP c025.5c96.90e0 - AP is already in joined state
*Jun 14 12:14:31.918: *%CAPWAP-3-DATA_TUNNEL_DELETE_ERR2: 1 wcm:  Failed to dele
te CAPWAP data tunnel with interface id: 0x0 from internal database. Reason: AVL
 database entry not found
 database entry not found
from AP c025.5c96.90e0 - AP is already in joined state
*Jun 14 12:14:37.210: *%CAPWAP-3-DATA_TUNNEL_DELETE_ERR2: 1 wcm:  Failed to dele
te CAPWAP data tunnel with interface id: 0x0 from internal database. Reason: AVL
 database entry not found
*Jun 14 12:14:52.628: *%CAPWAP-3-ALREADY_IN_JOIN: 1 wcm:  Dropping join request
from AP c025.5c96.90e0 - AP is already in joined state
*Jun 14 12:14:52.630: *%CAPWAP-3-DATA_TUNNEL_DELETE_ERR2: 1 wcm:  Failed to dele
te CAPWAP data tunnel with interface id: 0x0 from internal database. Reason: AVL
 database entry not found
*Jun 14 12:14:57.920: *%CAPWAP-3-ALREADY_IN_JOIN: 1 wcm:  Dropping join request
from AP c025.5c96.90e0 - AP is already in joined state
*Jun 14 12:14:57.922: *%CAPWAP-3-DATA_TUNNEL_DELETE_ERR2: 1 wcm:  Failed to dele
te CAPWAP data tunnel with interface id: 0x0 from internal database. Reason: AVL
 database entry not found
*Jun 14 12:15:13.340: *%CAPWAP-3-ALREADY_IN_JOIN: 1 wcm:  Dropping join request
from AP c025.5c96.90e0 - AP is already in joined state
*Jun 14 12:15:13.342: *%CAPWAP-3-DATA_TUNNEL_DELETE_ERR2: 1 wcm:  Failed to dele
te CAPWAP data tunnel with interface id: 0x0 from internal database. Reason: AVL
 database entry not found
*Jun 14 12:15:18.632: *%CAPWAP-3-ALREADY_IN_JOIN: 1 wcm:  Dropping join request
from AP c025.5c96.90e0 - AP is already in joined state
*Jun 14 12:15:18.634: *%CAPWAP-3-DATA_TUNNEL_DELETE_ERR2: 1 wcm:  Failed to dele
te CAPWAP data tunnel with interface id: 0x0 from internal database. Reason: AVL
 database entry not found

 

Hi,

On the WLC, use the AP authorization list based on their MAC address. The AP authorization list is available under Security > AP Policies in the WLC GUI.

 

Also paste the output of this command:

show ap auth-list

 

​Regards

Dont forget to rate helpful posts

Hi Sandeep

I cant find in WLC GUI AP authorization list !?

I see in WLC GUI:

Security > AAA > AP Policy > Policy Configuration :

Authorize MIC APs against AAA (Check box)

AP with Manufacturing Installed Certificate (Check box)

 

3850#show ap auth-list
Authorize MIC APs against AAA                 : Disabled
Authorize LSC APs against Auth-List           : Enabled

APs Allowed to Join:
  AP with Manufacturing Installed Certificate : Disabled
  AP with Self-Signed Certificate             : Enabled
  AP with Locally Significant Certificate     : Disabled

 

AP1602i# (error log)

*Mar  1 00:02:28.874: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Mar  1 00:02:28.874: %CAPWAP-3-ERRORLOG: ApMgr list is empty..
*Mar  1 00:02:28.874: %CAPWAP-3-ERRORLOG: No valid AP manager found for controll
er 'Ctrl1' (ip: 192.168.188.22).
*Mar  1 00:02:28.874: %CAPWAP-3-ERRORLOG: Failed to join controller Ctrl1.
*Mar  1 00:02:28.874: %CAPWAP-3-ERRORLOG: Failed to join controller.
*Mar  1 00:02:28.874: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer me
ssage. Event 31, state 2
*Mar  1 00:02:28.874: %CAPWAP-3-ERRORLOG: Failed to handle timer message.
*Mar  1 00:02:28.874: %CAPWAP-3-ERRORLOG: Failed to process timer message.
*Mar  1 00:02:28.874: %CAPWAP-3-ERRORLOG: Go join a capwap controller
Not in Bound state.

 

 

 

*Mar  1 00:02:18.646: %CAPWAP-3-ERRORLOG: No valid AP manager found for controll
er 'Ctrl1' (ip: 192.168.188.22).
*Mar  1 00:02:18.646: %CAPWAP-3-ERRORLOG: Failed to join controller Ctrl1.
*Mar  1 00:02:18.646: %CAPWAP-3-ERRORLOG: Failed to join controller.
*Mar  1 00:02:18.646: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer me
ssage. Event 31, state 2
*Mar  1 00:02:18.646: %CAPWAP-3-ERRORLOG: Failed to handle timer message.
*Mar  1 00:02:18.646: %CAPWAP-3-ERRORLOG: Failed to process timer message.
*Mar  1 00:02:18.646: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Mar  1 00:02:28.650: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Mar  1 00:02:28.650: %CAPWAP-3-ERRORLOG: ApMgr list is empty..
*Mar  1 00:02:28.650: %CAPWAP-3-ERRORLOG: No valid AP manager found for controll
er 'Ctrl1' (ip: 192.168.188.22).
*Mar  1 00:02:28.650: %CAPWAP-3-ERRORLOG: Failed to join controller Ctrl1.
*Mar  1 00:02:28.650: %CAPWAP-3-ERRORLOG: Failed to join controller.
*Mar  1 00:02:28.650: %CAPWAP-3-ERRORLOG: SM handler: Failed to process timer me
ssage. Event 31, state 2
*Mar  1 00:02:28.650: %CAPWAP-3-ERRORLOG: Failed to handle timer message.
*Mar  1 00:02:28.650: %CAPWAP-3-ERRORLOG: Failed to process timer message.
*Mar  1 00:02:28.650: %CAPWAP-3-ERRORLOG: Go join a capwap controller
Not in Bound state.

Hi,

AP with Manufacturing Installed Certificate (Check box) - Enable it.

3850#show ap auth-list
Authorize MIC APs against AAA                 : Disabled
Authorize LSC APs against Auth-List           : Enabled

APs Allowed to Join:
  AP with Manufacturing Installed Certificate : Disabled
  AP with Self-Signed Certificate             : Enabled
  AP with Locally Significant Certificate     : Disabled

 

Please enable AP with Manufacturing Installed Certificate and then wait for 2-3 minutes. AP will join.

 

Regards

Dont forget to rate helpful posts

thanks a lot dear Sandeep wink

 

Review Cisco Networking products for a $25 gift card