Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

100% channel from 6 to 11 busy

Hi,

I have some AP 1100 and 1200 that shows 100% busy channel from 6 to 11 everytime.

Is there anybody with the same problem?

I tried to disconnect the radio alarms close to AP but there are still interferences.

Any suggests?

Thanks in advance

Antonio

2 REPLIES

Re: 100% channel from 6 to 11 busy

Antonio,

The only way to be sure of what's happening is to get a Spectrum Analyser.

Richard

Re: 100% channel from 6 to 11 busy

As stated before,get a spectrum analyzer. Turn off G and use B only and see if the percentage goes down.

If you do not have access to a real spectrum analyzer and/or one is too expensive, get a WiSpy from http://www.metageek.net/

They are cheap and give a good idea of channel usage, but are not a substitute for a full blown analyzer. To what it looks like:

http://www.metageek.net/products/chanalyzer/chanalyzer-21-screenshots

117
Views
0
Helpful
2
Replies