Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

1100 errors

Hello

I update my 1100 AP from wireless B to

Wireless G

And now it requiring a 5501.img file

Interface Dot11Radio0, no radio firmware file (flash:/c1100-k9w7-mx.123-4.JA1/5501.img) was found

When I try to download it the Cisco do not give for me permition

When I try to upgrade IOS it does not work properly

2 REPLIES
Community Member

Re: 1100 errors

Well, upgrade of hardware (from B to G) shouldn't require firmware upgrade. Any way, if you need to upgrade the firmware go for the TFTP server based upgrade. This procedure is explained at http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_guide_chapter09186a0080184ad5.html#1038660

Cisco is not letting you download the firmware because your contract is not renewed. They will refuse to replace the unit also in case of major lockup during upgrade.

Good luck.

Community Member

Re: 1100 errors

it do nit works

12.11 IOS do not startup

and IMG file is not there

140
Views
0
Helpful
2
Replies
CreatePlease to create content