Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

1131 cannot register to wlc 2006

Hi all,

AP model is 1131 ver 12.3(11)JX1

WLC model is 2006 ver 4.0.179.8

Router as a dhcp server

ip dhcp pool DHCP_Pool

network 192.168.1.0 255.255.255.0

default-router 192.168.1.1

option 43 ascii "192.168.2.10"

The ap can obtain ip address and can ping to wlc (192.168.2.10). However, it cannot register to the wlc.

If I use below command on AP, the ap can register to wlc.

lwapp ap controller ip address 192.168.2.10

But I don't want to config each ap with the command.

Any way to solve the register issue?

Thanks.

1 REPLY
Silver

Re: 1131 cannot register to wlc 2006

For this scenario, you will have to use the Option 60 as well. The way DHCP option 43 should be configured depends on the LAP. For instructions on configuring DHCP option 43 for 1100 read http://www.cisco.com/en/US/products/ps6306/products_installation_guide_chapter09186a0080797c8c.html#wp1007845

166
Views
0
Helpful
1
Replies
CreatePlease login to create content