Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

1142 AP & ASA 5505

I have the latest IOS installed on an 1142 AP.  I have the private secured SSID / VLAN working like a top.  I have a 2nd VLAN configured on my ASA for public access.  I also have the VLAN setup on the AP.  How do I get these two talking??  I'm assuming I have to assign my second VLAN to an interface on the ASA?  Any help would be appreciated!

Everyone's tags (2)

Re: 1142 AP & ASA 5505

Most likely you will want to make the interface you create on the ASA the default gateway for that VLAN.  Depending on how you have things setup you could either create a layer-2 only VLAN on the switched network running to the ASA so all traffic on the VLAN has to pass through the ASA, or you could just plug the AP into one of the ASA ports and enabled trunking.

New Member

Re: 1142 AP & ASA 5505

I have a 2960 in the mix also.  So it is laid out like this:

1142 AP --------------TRUNK-----------------2960--------------TRUNK--------------ASA 5505.

Think I am missing a very small but vital piece.... Any ideas?