We are working to install 3 floors worth of wireless in our office building, Which AP's would be the recomended ones? From what I take, the only differance between the three is upgradability. Is this correct?
If you want to run dual band then the 1200 is the one to get The 1200 can run either IOS or VxWorks
The AP1100 is very price effective and the radios can be field replaced if you want to change to 802.11g when it comes out but has fixed antenna Runs IOS only
The AP350 is the oldest model of the 3 and is a fixed configuration 802.11b radio that can not be hardware upgraded in the future (firmware updates are avaliable) but can be ordered with removeable antenna so you can use higher gain ones if need be
At this point in time it only runs VxWorks
The best one really depends on the size of network and what future expansion you expect
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...