Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

1200 series AP and EAP failure

Heres my problem, remote site standalone AP, users failing authentication. Radius key is configured correctly. Radius server log shows the EAP information blank for the authentication requests.

The AP configuration has been checked and double checked.

I suspect their may actually be something wrong with the AP itself.

2 REPLIES

Re: 1200 series AP and EAP failure

Hi Scott,

Please try test authentication from AP and see if that works,

telnet to AP and issue command,

ap#test aaa group radius username password legacy

Username = The one configured in Radius

If that works then get debugs,

debug aaa authentication

debug radius

ter mon

Thanks,

Jaddeep

New Member

Re: 1200 series AP and EAP failure

my AP also...face the same problem...is it the 'password legacy' is default password?or it same with the password which is configured in ACS?

286
Views
0
Helpful
2
Replies