Re: 1200 SERIES AP COMPATIBILITY WITH 340US AP'S AND 340US BRIDG
WE HAVE AN ISP WITH OUR INFASTRUCTURE USING A LARGE NUMBER OF THE AIR-BR342US BRIDGES RUNING IN CLIENT MODE. WE HAVE ADDED SOME OF THE 350'S AIR-BR350-A-K9 BUT THEY WILL NOT COMMUNICATE WITH THE 340'S IN ANY MODE. WE WANT TO ADD SOME OF THE 1242AG APS TO OUR STRUCTOR AND WANT TO BE SURE THEY WILL COMMUNICATE WITH OUR 340 BRIDGES IN CLIENT MODE RUNNING 2.4GHZ RANGE. I JUST WANTED TO CLEAR UP THAT WE ARE NOT USING 340AP'S. WHAT DO YOU THINK?
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...