Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

1240 WGB Trunking

Is it possible to trunk multiple vlans over to the WGB? If so how would I do it?

Thank

Chappy

1 REPLY
Silver

Re: 1240 WGB Trunking

No. A Cisco WGB device does not support multiple VLANs in it. A 1100 AP, however, that acts in WBG mode can support multiple VLANs in it but with these restrictions:

The VLANs must be assigned on both the root AP and WGB sides.

The WGB must be connected to a dot1Q-capable switch.

The Infrastructure SSID must be mapped to the native VLAN on root and the WGB.

The WGB associates on the Infrastructure SSID.

With this configuration, it is possible to associate WGB (WGB BVI interface) as a Native VLAN and have wired clients configured behind a dot1q switch associated to different (non-Native) VLANs.

187
Views
0
Helpful
1
Replies
CreatePlease to create content