Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

1242 A radio does not come up

I have converted a 1242 to LWAPP. I had it join the WLC which is running many 1132's.

I notice that the b/g radio is up but the A radio of teh 1242 is not.

I see in teh radio interfaces for this AP, the a radio has Admin status enbaled; Oper Status DOWN; and Regulatory Domain - Not Supported??

Why is the 1242 a radio not coming up?

3 REPLIES
Green

Re: 1242 A radio does not come up

What is the firmware version of the radio? OLder A radios (with part numbers ending in "20" , I think)? It might be that the older 'A' radios are not supported.

If it is a hardware Rev issue, you can get update/upgrade radios from places like CDW (www.cdw.com).

What version of LWAPP code did you install?

Hall of Fame Super Silver

Re: 1242 A radio does not come up

I would also check on the WLC what the Country Code the LAP is set to.

-Scott
*** Please rate helpful posts ***
New Member

Re: 1242 A radio does not come up

This is a "new" 1242 - but it did not get shipped with LWAPP

For the 1242 we get:

IOS 12.4.16b JA

Boot 123.7.1

SW 5.1.151.0

The WLC is running 5.1.151.0

166
Views
0
Helpful
3
Replies