Please see attached Visio to understand my topology. I am using a 1242 that is running c1240-k9w7-mx.124-10b.JDA.
Issue: When I try to use TCP 80 (HTTP) from the laptop I get "the page cannot be displayed" even though I can ping the server with 30 to 40ms ping times. If I used the wired computer I am able to HTTP to the server. Any idea what would allow the wired machine to connect but the wireless laptop to fail when using HTTP or any other application layer protocol? Please note that all the devices exist on a flat network and both the laptop and bridge are using the "A" radio on the 1242.
Thanks in advance!
Here is my config...
Current configuration : 2773 bytes
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
logging buffered warnings
logging console notifications
logging monitor notifications
enable secret 5 $1$7/oA$hurwSP15N3UgLWSzTvE6//
aaa authentication login default local
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authorization exec default local
aaa accounting network acct_methods start-stop group rad_acct