Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

1300 bridges

Can I associate the non-root bridge model 1310 to the root bridge model 1400? Is there any problems on the configuration I need to be aware of? I am really appreciated that.

  • Other Wireless - Mobility Subjects
7 REPLIES

1300 bridges

As I recall and you should confirm this in the specs.

1400 is 5 GHZ only

1300 is 2.4 GHZ only

So, no ...

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
New Member

1300 bridges

I checked the product data sheet for the 1400, here is what they said:

The concept of mobile networks is significant not only for service providers looking to offer seamless network access, but also for individual organizations such as municipal public safety units. In many instances, the technology exists to create the zones that provide the mobile network, but the challenge lies in bringing the network to these zones. The Cisco Aironet 1400 Series Wireless Bridge provides a cost-effective solution to this application. The wireless bridge can connect to the network that contains the 2.4 GHz access points or bridges that are providing wireless zone coverage, and also provide the backhaul link to the high-speed network (Figure 2). Whether these zones are 802.11 hot spots at cafes and restaurants or bridged 802.11b cells for mobile networks, the Cisco Aironet 1400 Series Wireless Bridge provides a non-interfering and higher speed distribution service.

1300 bridges

Here is the data sheet for the 1400 and they are only 5 GHz. I think that document is wrong

http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5279/ps5285/product_data_sheet09186a008018495c.html

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
New Member

1300 bridges

The extract this paragraph from the same sources below:

http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5279/ps5285/product_data_sheet09186a008018495c.html

in the "Mobile Networks and Wireless Bridges" section.

Can it still works with the 2.4 GHz?

1300 bridges

As George had said, the 1400 is a 5Ghz AP only.  From the link you posted, look at Table 2.

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

1300 bridges

I am really appreciated your helps Stephen and George. This information is help alot.

1300 bridges

yea, it saves you problems on the back end.

Keep in mind, Cisco axed both of these...

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
353
Views
0
Helpful
7
Replies
This widget could not be displayed.