Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

1300 cabling Question

does anyone know if i can use dual RG-6 cable at length of 1200 ft (300m)

between the Power-Supply and the AP itself?

or for that matar what is the max length of this type of cable to be used in this situation?

1 REPLY
Hall of Fame Super Red

Re: 1300 cabling Question

Hi Oded,

Dual RG-6 coaxial cable to run from the power injector to the 1300. See attached notes:

Cisco Aironet 1300 Series Access Point/Bridge Power Injector

The Cisco Aironet 1300 Series Outdoor Access Point/Bridge Power Injector,converts the standard 10/100 BaseT Ethernet interface that is suitable for weather protected areas to a dual F-Type connector interface for coax cables that are more suitable for harsh outdoor environments. The Power Injector also provides power to the outdoor unit over the same cables with a power discover feature and surge protection. To support longer cable runs from your wireless network switch or router, the Power Injector LR is designed to accommodate ***up to a 100 meter coaxial cable run*** plus 100 meters of indoor cat5 cable enabling total cable runs up to 200 meters. The Cisco Aironet 1300 Series Outdoor Access Point/Bridge ships with the Power Injector LR2 and an AC power supply.

From this link:

http://www.cisco.com/en/US/products/ps5861/products_data_sheet09186a008022551d.html

Hope this helps!

Rob

130
Views
0
Helpful
1
Replies