I asked that question because when I made a test with AIR-AP1242AG-E-K9 and disabled all OFDM data rates, I still saw that current Transmitter Power CCK/OFDM = 17 dBm which corresponds to 50 mW power. (antenna gain is set to 2 dB).
All power levels are subject to country standards. The "E" model access points are set to European standards, which I believe restrict 802.11b to 17dB (50mW).
I apologize for assuming you were in the Americas. Assuming now that you're in Europe, you won't be able to order an "A" access point. Or at least, you can order it, but you can't legally use it at full power :)
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...