Hi, the root bridge of our Aironet 1310 bridge, S/W ver 12.3(4)JA, always seems to lose it's configuration for the "distance settings" when it reassociates with the non-root bridge. Current settings are set for 4 km but after it reassociates, the distance setting reverts back to the default "0". I've configured the radio through the web interface and through the CLI, to no avail. The reassociation usually occurs after the interface Dot11Radio0 changed state to reset. We have other 1310 bridges, same IOS version, that aren't losing there distance settings, after a reset. At this time, I don't know if resets are occuring due to power failures at the facility or radio interferences. Thanks Gary
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...