1410 Bridges Associated but not passing traffic

[moorejb]

I have 4 1410 bridges in a point to multipoint configuration. I have 1 root ridge and 3 non-root bridges. The 3 non-root bridges are associated with the root bridge; however I cannot ping or pass any traffic over the wireless interfaces. Any suggestions on what might be the problem.

[srosenthal · Accepted solution]

Can you post the configs?

Are you able to connect to each bridge from the root site? Do you have VLAN's defined and are all the bridges configured for the same native vlan?

Seth Rosenthal, CWNE #55

[moorejb]

Never mind got it working, wrong encryption settings.