Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

1410 native vlan Change

I need to use vlans in a 1410 bridge environment an i need to change the default native vlan too. The question is: what happens to the BVI1 interface, since this one is associated with the native vlan?; is it automatically associated with the new native vlan?, will i need to create a new interface?, what about the connectivity? (this radio does not have a console port). I wolud like to make all changes via CLI.

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: 1410 native vlan Change

You can configure multiple VLANs on the Wireless bridge using the GUI, you do not need CLI or console access to configure VLANs. Here is a good document which explains how to configure VLANs on Bridges.

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801d0815.shtml#vlanbr

1 REPLY
Silver

Re: 1410 native vlan Change

You can configure multiple VLANs on the Wireless bridge using the GUI, you do not need CLI or console access to configure VLANs. Here is a good document which explains how to configure VLANs on Bridges.

http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801d0815.shtml#vlanbr

167
Views
0
Helpful
1
Replies
CreatePlease to create content