Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

1500 RAP ethernet connection

How does one confirm, change, control the speed/duplex setting on the 1500 RAP?

Is the setting fixed? How is its setting?

3 REPLIES

Re: 1500 RAP ethernet connection

all of the LWAPP AP's should be connected to swtich ports that are set to speed/duplex auto. The AP will negotiate to get to it's desired settings.

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Re: 1500 RAP ethernet connection

Is there any way to confirm the negotiation worked correctly?

Re: 1500 RAP ethernet connection

you can do a show interface on the switch, and see what it is running at. if you look in the buffer, you will see messages about mismatch if they are not in synch. Of course the easiest way, is if the RAP is up and running, all should be ok.

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
169
Views
0
Helpful
3
Replies